Skip to content
LRC-1060 Column speaker, 60cm, EN54
EV_LRC_Family_Black+White
LRC Series

LRC-1060

Compact 60 cm passive column with PaSS dispersion control — weatherized for full outdoor exposure and EN54-24 Type B certified.
Loading

LRC-1060 Column speaker, 60cm, EN54

A passive line-radiator install column with a built-in 70/100-V transformer and ASC protection.

The LRC Series — Line Radiator Column — is built for installations where audio quality and clean architecture carry equal weight. Purpose-built 2.5-inch drivers sit behind proprietary PaSS phase plugs that control vertical dispersion, so energy lands on listeners instead of exciting reflective floors, ceilings, and walls. The paintable enclosure comes in RAL 9004 signal black or RAL 9003 signal white and mounts close to the wall on the SwifTilt bracket, which conceals cables and hardware.

The LRC-1060 is the compact column of the family: six active drivers and two passive radiators in a 580 mm enclosure that reaches down to 70 Hz. The integrated 70/100 V transformer (with Lo-Z operation) taps from 4 to 60 W, and patented Automatic Saturation Compensation protects the electronics while holding low-frequency response. A fixed, symmetrical 130° × 20° pattern and EN54-24 Type B certification suit it for speech, program, and voice-alarm duty — indoors or in full outdoor exposure.

What the LRC-1060 brings

PaSS dispersion control
Six 2.5-inch drivers behind custom phase plugs hold a tight vertical pattern with smooth frequency response.
SwifTilt mounting
Flush, pan, and tilt from one compact bracket: ±80° pan at every down-tilt angle, tilt to 25°, inverted mounting, concealed cables.
Full outdoor exposure
IP56c weatherization takes it outside year-round; the enclosure is paintable to match the site.
Voice-alarm certified
EN54-24 Type B certification covers life-safety and evacuation systems.
70/100 V + ASC
Integrated transformer with taps from 60 W down to 4 W; patented ASC guards electronics while keeping low-frequency response.
System-matched DSP
Dedicated presets for Dynacord DSP matrix processors and amplifiers, with EASE, PREVIEW, and SONICUE software support.
2026-DC-EV-HolyTrinityChurch_02
Case study

Heard in Shakespeare's church

Holy Trinity Church in Stratford-upon-Avon — where Shakespeare is buried — replaced an end-of-life 100 V system with an Electro-Voice and Dynacord solution. LRC-1100 columns in the chancel and choir stalls control vertical dispersion naturally, keeping energy off centuries-old stone while speech lands clearly in every pew.

Specifications at a glance

  • Frequency range (−10 dB): 70 Hz – 15 kHz

  • Max SPL: 122 dB · axial sensitivity 90 dB (1 W/1 m)

  • Coverage: 130° × 20°, fixed symmetrical pattern

  • Power handling: 100 W continuous / 200 W program (8 Ω)

  • Transformer taps: 60/30/15/8/4 W @ 70 V · 60/30/15/8 W @ 100 V

  • Connections: 4-pin Euroblock, input + pass-through

  • 580 × 105 × 144 mm · 4.4 kg · IP56c · EN54-24 Type B

All figures from the LRC-1060 engineering data sheet.

Explore the Full Column Speakers Range

All three LRC columns — 60 cm, 100 cm, and the two-way 1 m — compared side by side on the Column Speakers page.

Features

Slim it onto the wall and let it work. The LRC-1060 is a passive line-radiator column built for install, with a pre-fitted transformer for 70- or 100-volt lines. EV's patented Automatic Saturation Compensation preserves low-frequency response and shields the electronics from improper loads, no matter how many speakers share the line. The included bracket handles almost any aim — flush, tilted, inverted, or panned. Foreground, background, or main speaker in a room that wants sound, not boxes.
  • Drops onto distributed lines — pre-installed transformer for 70- or 100-volt systems.
  • Protects the system — patented ASC preserves low end and guards electronics against improper loads.
  • Aims almost any way — included bracket handles flush, downtilt, up-tilt (inverted), and pan.
  • Blends in — sleek, neutral industrial column for foreground, background, or main duty.
  • Best with Dynacord — dedicated presets on Dynacord DSP matrix processors and amplifiers tune output and protection.

Specifications

Overview & Features

Configuration

Passive column array; 6x 2.5" active drivers + 2x 2.5" passive radiators

Acoustic Performance

Max SPL

122

Frequency Range (-10 dB)

70 Hz - 15000 Hz

Coverage angle (H)

130

Coverage angle (V)

20

Coverage Angle

130 × 20