FLY THE LOW END
Anchor the array from the top down. The EVA-2151D is a high-power, dual 15-inch, front-loaded subwoofer built for fixed installation, driven by two DVX3159A 15-inch drivers, with PI versions adding a stainless steel three-layer grille and a CDG dual gland nut cover for indirect outdoor exposure. A 130 dB continuous, 136 dB peak module rated 1000 W continuous, it runs 4 ohms nominal with no internal passive crossover, so it needs an active crossover and its own amplifier channels. An 18 mm 13-ply birch plywood enclosure with EVCoat, reinforced with internal steel rigging, carries the load. Fly it at the top of an EVA full-range array or in standalone subwoofer arrays on the EVA-EG2 grid, indoors or out.
Key features
Features
- Reach the bottom — dual 15-inch woofers extend down to 28 Hz (-10 dB).
- Concert-grade output — 136 dB peak SPL, 1,000 W continuous handling.
- Built for the weather — 13-ply birch with EVCoat stands up to the outdoors.
- Arrays as a system — designed to fly with EVA full-range modules.
- Disappears on the wall — black finish for permanent, low-profile installs.
Specifications
Overview & Features
- Configuration
2 x DVX3159A, 15in (381mm) Driver
Acoustic Performance
- Max SPL
136
- Frequency Response
Frequency Range (-10dB)
- Sensitivity (1W/1m)
100dB (1W/1m)
Transducers & Drivers
- LF transducer size (in)
2 x DVX3159A, 15in (381mm) Driver
Power & Amplification
- Power Handling
1,000W/4,000W (Continuous/Peak)
Full-range modules, same grid.
EVA-2082S full-range modules array below the sub in four coverage patterns, from 90 by 6 to 120 by 20 degrees.
Complete Your Rig
See Every Line Array
From compact EVA modules to X-Line Advance, explore every Electro-Voice line array.
Design the Install
From coverage maps to rigging loads, plan the deployment with an Electro-Voice system specialist.
