Skip to content
logo
V600:2 Power amplifier, 600W, 2 channel
Details
Dynacord_V600.2_2Amps_Front_Top_Left
V Series

SIX HUNDRED WATTS. HALF A RACK.

The 600-watt, two-channel V Series amplifier for small to mid-sized fixed installations — one rack unit high, half a rack wide.
Loading

V600:2 Power amplifier, 600W, 2 channel

A compact 2-channel installation amplifier with 600 W of flexible power sharing using powerTANK, supporting 4-ohm, 8-ohm, 70 V, and 100 V loudspeaker systems.
  • Total Output Power*
  • Power Tank
  • Output Power* @ 70 V; all channels equally driven
  • Channels
Documentation & Downloads

Dynacord has introduced the V600:2, a 600-watt two-channel amplifier that extends its V Series family for small to mid-sized fixed installations. The model was revealed at ISE 2024.

The amplifier occupies one rack unit in height and half a rack width, which opens up flexible mounting — including under-counter installation.

powerTANK acts as a power reservoir, giving the V600:2 direct access to its full 600 watts and allowing asymmetric power allocation across channels as needed.

Energy use is held down by ecoRAIL, with Auto Power Down shutting the amplifier off when no audio signal is present. The V600:2 also includes dualCOOL thermal management.

Key Features

Tune it precisely
FIR filters, 31-band GEQ, and PEQ per channel onboard.
Drive distributed lines
direct-drive 70 V/100 V output, no transformer needed.
Protect the system
load-impedance monitoring plus full audio and thermal limiters.
Wire it clean
Phoenix connectors and a 19-inch, 2 RU install chassis.
Set and selectable
remote power and preset-select inputs for fixed installs.
Runs cool
front-to-rear three-stage fans, rated for +5°C to +40°C ambient.

Official how-to

How to Configure the V600

Complete the System

Where this unit fits, and what it pairs with.

Features

Flexible power. Compact footprint. The V600:2 delivers 600 W of total output power across two channels, with flexible power sharing using powerTANK to dynamically allocate available power where it is needed. Support for 4-ohm, 8-ohm, 70 V, and 100 V loudspeaker systems gives installers the flexibility to use the same amplifier across a wide range of applications. Built-in ecoRAIL technology reduces energy consumption while continuing to deliver audio at levels suitable for background music, while Auto Power Down can reduce consumption even further during extended periods without signal. dualCOOL provides quiet convection cooling during normal operation and adds intelligent fan cooling only when needed, while a PFC power supply and comprehensive protection package support dependable operation under demanding conditions. The V600:2 integrates easily into larger V-Series systems. RJ45 Line-In accepts audio directly from the VZX-8 8-Zone Audio Processor for simple system wiring, while V600:2 and V600:4 amplifiers can be mixed and matched to create the right balance of power, channel count, and cost for each project. Its compact half-rack, 1 RU design supports tabletop, rack, under-surface, or wall installation, with two units fitting side by side in 1 RU.
  • Share 600 W where it is needed — flexible power sharing using powerTANK dynamically allocates available output power across two channels without manual power allocation.
  • Power the loudspeaker system you need — supports 4-ohm, 8-ohm, 70 V, and 100 V loads from the same amplifier.
  • Save energy without giving up background music — ecoRAIL reduces power consumption while continuing to deliver audio at levels suitable for background music, while Auto Power Down can reduce consumption even further during extended periods without signal.
  • Run quietly, even in sensitive spaces — dualCOOL operates by convection under normal conditions and adds intelligent fan cooling only when needed.
  • Built for dependable operation — a PFC power supply and comprehensive protection package help maintain reliable performance under demanding power and thermal conditions.
  • Mount it your way — use it on a tabletop, in a rack, under a surface, or on a wall; two units fit side by side in 1 RU.

Specifications

Acoustic Performance

Frequency Response

Filter-selectable, -3 dB (ref. 1 kHz, analog in to speaker out): HP 30/100/150 Hz to 20 kHz, LP 30 to 150 Hz (4/8 ohm); HP 50/100/150 Hz to 20 kHz, LP 50 to 150 Hz (70/100 V)

THD+N

< 0.1% (1/8 rated output power, 1 kHz)

Crosstalk between channels (dBA)

< -70 dB (4 ohm) to < -95 dB (100 V), ref. 1 kHz, 12 dB below maximum

Signal-to-Noise Ratio

> 100 dB (A-weighted, ref. rated output power)

Power & Amplification

Total Output Power*

600 W

Direct Drive (70V/100V)

Yes

Recently visited