1,200 W of power for up to 130 dB max SPL
Rear-panel LCD DSP — presets and system settings right on the speaker
QuickSmart App controls up to six boxes over Bluetooth Low Energy
ELX200 Portable Loudspeakers
ELX200-10P — 10″ Powered
The compact one — full ELX200 power in the smallest box.
Tight corners, speech-first rooms and side-fill duty: 10-inch coverage with the same 1,200 W engine as its bigger siblings.
For: speech & presentation · small venues · side fills
10″ · 1200 W · 130 dB
ELX200-12P — 12″ Powered
The do-it-all one — the size most rigs reach for first.
Band vocals, DJ sets, houses of worship: 130 dB of headroom with DSP on the back panel and app control from out front.
1,200 W of power for up to 130 dB max SPL
LCD DSP interface for presets and system-match settings without leaving the stage
QuickSmart App monitors and controls up to six ELX200 boxes
For: bands · mobile DJs · houses of worship
Start here · 12″ · 1200 W
ELX200-15P — 15″ Powered
The big-coverage one — maximum reach in the powered line.
Bigger floors and outdoor sets: the 15-inch woofer buys low-end reach before a subwoofer even enters the rig.
1,200 W with up to 132 dB max SPL — the loudest ELX200 top
Same LCD DSP and QuickSmart App control as the whole family
Matched low-pass settings on the subs make top-plus-sub pairing quick
For: DJs · bigger rooms · outdoor sets
15″ · 1200 W · 132 dB
ELX200-12SP — 12″ Powered Sub
The compact low end — real sub weight without the van.
Adds foundation under 10s and 12s while staying a one-person lift.
1,200 W powered subwoofer reaching 129 dB
Adjustable low-pass at 80, 100, 120 or 150 Hz for clean top matching
M20 threaded pole plate and two-handle design — the top mounts right on it
For: compact rigs · mobile DJs · speech-plus-music
12″ sub · 1200 W · 129 dB
ELX200-18SP — 18″ Powered Sub
The full low end — 18 inches of foundation for the ELX200 rig.
Dance floors and full-band gigs: reach down to 47 Hz with the same match-the-top DSP.
1,200 W and up to 132 dB from an EVS-18L woofer
Frequency response down to 47 Hz (-3 dB)
Adjustable low-pass, two combo inputs and XLR link outs
For: dance floors · full bands · high-output rigs
18″ sub · 1200 W · 132 dB
ELX200-10 — 10″ Passive
The small passive — ELX200 sound for amp racks and brackets.
Installed corners, under-balcony fill and compact amp-driven rigs where the power lives in the rack.
Two-way passive design for amp-driven and installed systems
Compact cabinet suits wall brackets and tight corners
Pairs with Dynacord DSP amplifiers for a one-brand rack
For: fixed install · fill systems · rental add-ons
10″ · Passive · 2-way
ELX200-12 — 12″ Passive
The rack-rig 12 — mains or monitors, amp-driven.
Rental fleets and installed rooms running external amplification get ELX200 coverage with standard wiring.
Two-way passive design for mains or monitor duty
Same ELX200 voicing across powered and passive rigs
Pairs with Dynacord DSP amplifiers for a one-brand rack
For: rental & production · houses of worship · bands
12″ · Passive · 2-way
ELX200-15 — 15″ Passive
The full-size passive main — maximum cone on an amp channel.
The biggest passive top in the family for installs and inventories that need output night after night.
Two-way passive design with 15-inch low end
Built for permanent rooms and touring racks alike
Pairs with Dynacord DSP amplifiers for a one-brand rack
For: rental & production · clubs · installs
15″ · Passive · 2-way
ELX200-12S — 12″ Passive Sub
The compact passive low end.
One amp channel adds the foundation — sized for rigs that move.
400 W continuous / 1,600 W peak power handling
Compact passive subwoofer for amp-driven systems
Matches the passive tops for a full ELX200 rack rig
For: compact installs · rental racks
12″ sub · Passive · 400 W cont
ELX200-18S — 18″ Passive Sub
The full-size passive foundation.
Eighteen inches of low end for permanent rooms driven from the amp rack.
400 W continuous / 1,600 W peak power handling
18-inch passive subwoofer for installed and touring systems
Completes an all-passive ELX200 system on Dynacord amplification
For: fixed install · high-output amp rigs
18″ sub · Passive · 400 W cont
Who It's For
Match the box to the gig — every card links to how people actually use it.
12P · 15P · subs
Bands
Bands
Vocals over the mix with headroom left — and monitors from the same family.
12P · 15P · 18SP
Mobile DJs
Mobile DJs
1,200 W tops with a matched 18 under them, controlled from the booth.
Ready for ELX200?
Start with the 12 — or build the rig your way.
Ready to Buy?
Start Here: ELX200-12P
The size most rigs reach for first — 1,200 W and app control.
Got Vocals?
Add an ND96 Vocal Mic
A dynamic supercardioid vocal mic built for loud stages.
Need More Output?
Level Up to the Next Family in the Series: EKX
More output and coverage — the next step in the portable line.