LRC-1100
LRC-1100 Column speaker, 100cm, EN54
The LRC Series — Line Radiator Column — is built for installations where audio quality and clean architecture carry equal weight. Purpose-built 2.5-inch drivers sit behind proprietary PaSS phase plugs that control vertical dispersion, so energy lands on listeners instead of exciting reflective floors, ceilings, and walls. The paintable enclosure comes in RAL 9004 signal black or RAL 9003 signal white and mounts close to the wall on the SwifTilt bracket, which conceals cables and hardware.
The LRC-1100 doubles the driver count: twelve 2.5-inch drivers plus passive radiators in a 950 mm column reaching 65 Hz. Vertical coverage switches between 20° and 40°, with a 5° acoustic down-tilt built into the pattern, and the integrated 70/100 V transformer (taps to 120 W) carries patented Automatic Saturation Compensation. At Holy Trinity Church — Shakespeare's church — LRC-1100 columns keep energy off centuries-old stone in the chancel and choir stalls.
What the LRC-1100 brings
Heard in Shakespeare's church
Holy Trinity Church in Stratford-upon-Avon — where Shakespeare is buried — replaced an end-of-life 100 V system with an Electro-Voice and Dynacord solution. LRC-1100 columns in the chancel and choir stalls control vertical dispersion naturally, keeping energy off centuries-old stone while speech lands clearly in every pew.
Frequency range (−10 dB): 65 Hz – 14 kHz
Max SPL: 126 dB narrow / 123 dB wide · sensitivity 93/91 dB (1 W/1 m)
Coverage: 130° × 20° or 40° switchable, 5° acoustic down-tilt
Power handling: 200 W continuous / 400 W program (8 Ω)
Transformer taps: 120/60/30/15/8 W @ 70 V · 120/60/30/15 W @ 100 V
Connections: 4-pin Euroblock, input + pass-through (12 AWG max)
950 × 110 × 150 mm · 7.6 kg · IP56c · EN54
All figures from the LRC-1100 engineering data sheet.
Explore the Full Column Speakers Range
All three LRC columns — 60 cm, 100 cm, and the two-way 1 m — compared side by side on the Column Speakers page.
Features
- Drops onto distributed lines — pre-installed transformer for 70- or 100-volt systems.
- Protects the system — patented ASC preserves low end and guards electronics against improper loads.
- Aims almost any way — included bracket handles flush, downtilt, up-tilt (inverted), and pan.
- Blends in — sleek, neutral industrial column that suits mains, support, foreground, or background.
- Best with Dynacord — dedicated presets on Dynacord DSP matrix processors and amplifiers tune output and protection.
Specifications
Overview & Features
- Configuration
Twelve 2.5" active drivers with PaSS phase plugs; three 2.5" and six 6.5" passive radiators
Acoustic Performance
- Max SPL
126
- Frequency Response
-2 4
- Frequency Range (-10 dB)
65
- Coverage angle (H)
130
- Coverage angle (V)
40